SilverStone Technology launches the new KL07E silent tower ATX case, which uses a special asphalt material to achieve a physical noise reduction effect. It has a simple shape and a high ceiling ATX tower design. Supports major ATX sized motherboards. installing a 360mm graphics card, a total of 3 sets of 140mm front and rear fans are pre-installed, ensuring substantially effective cooling airflow.
Specific
Model: SST-KL07B-E (black)
Housing material: plastic panel, iron body, asphalt panel
Applicable motherboards: Micro ATX, ATX (up to 12″ x 11″)
Hard Drive Space: Internal 3.5″ x 3 (compatible with 2.5″), 2.5″ x 3
Bezel I/O: USB 3.0 x 2, USB Type-C x 1, Audio x 1, MIC x 1
PCIE expansion slots: 7
CPU cooler height limit: 170mm
Support fans:
Front: 120/140mm fan holes x 3 (Integrated 140mm air inlet fan x 2)
Rear: 120/140mm fan hole x 1 (Integrated 140mm air outlet fan x 1)
Above: 120/140mm fan holes x 2
Supports water cooling:
Front: 120mm/240mm/280mm/360mm x 1
Top: 120mm/240mm x 1
Back: 120mm/140mm x 1
Graphics card length limit: 388mm, width limit: 172mm
Power Supply Length: Support ATX 190mm
Dimensions (depth x width x height): 467 x 222 x 510 mm
Weight: 9.23kg
Note: Support Kensington anti-theft lock
<銀欣 SilverStone KUBLAI 07E (KL07E)｜特殊瀝青板降躁材質>
SilverStone Technology, specialized in the field of PC silence, this time has specially selected a sound-absorbing material to reduce asphalt noise. The front panel, top panel and double-sided side panels of the chassis are all equipped with a special non-removable asphalt noise. -reduction of dust filters and even The dust filter is made of noise-reducing material. You can see that the KL07E case is so powerful in noise reduction and anti-noise. Not only does the special panel material provide noise reduction, but also the built-in 140mm pre-installed cooling fans on the front, 2 on the back, are one of the highlights that can be noticed. .
↑Outer box of the SilverStone KL07E case
↑SilverStone KL07E case body
↑KL07E The I/O interface is located on the right side of the top cover
↑The top panel and front panel are all with removable buckle, and the inside is lined with sound-absorbing material (non-removable)
↑Magnetic dust net on the top of the case and top fan opening
↑KL07E chassis front panel
↑Front panel switch buttons are hidden in the aesthetic design, with the power switch on top and the reset switch on the bottom.
↑After removing the front panel, you can see a top exhaust dust filter
↑The front panel and dust filter are removed to reveal two sets of 140mm front fans.
↑The POWER and RESET buttons are located on the upper left side of the front panel
SilverStone KL07E has a tower-shaped body with 2 sets of original SilverStone 140mm DC cooling fans pre-installed on the front panel. It can also be disassembled and modified with front-mounted 120, 240, 280 and 360mm AIOs. cooling needs, you can consider the front panel. If you’re on a tight budget, you might consider purchasing a set of front-mounted 120mm fans to complement the case’s air inlet and outlet system. It may be a better idea to install the AIO part according to personal needs After all, the original factory Even the pre-installed fan has made great efforts in sound reduction and noise reduction according to the author’s personal measurement.
↑KL07E Front panel removal list
↑After removing the right side panel, you can see that the factory wiring is clean and easy to quickly assemble the interface.
The side panels on both sides of the KL07E can be quickly detached using the two top and bottom screws on the back. Slide the KL07E close to the fuselage towards the front panel and check that the top and bottom buckles are aligned and tighten the rear screws to complete disassembly and assembly. Special filters in sound-absorbing bituminous material are also fixed on the internal parts of the panels on both sides.
↑Special sound-absorbing material is glued inside the side panel, and the panel is fixed by rear screws
↑The backplane motherboard mounting position is carefully hollowed out to facilitate the installation of the AIO bracket.
↑The back side of the chassis is a set of original 140mm fans, PCIe and bottom power supply placement.
↑Internal space for hardware installation, there are strip-shaped vents on the top cover and sides of the front panel, and the heat dissipation design is very effective
↑Pre-installed 140mm front 2 and rear 1 cooling fans inside
↑Lift the corner seats at the bottom of the casing
↑Power supply dust filter with rear pump
↑Instruction manual, copper column, copper column locking tool and screw set
<銀欣 SilverStone KL07E 硬體支援｜儲存裝置｜I/O 介面>
SilverStone KL07E is an ATX tower body that can support ATX motherboards up to 12″ For the integrated water cooling part, the front panel supports AIO up to 360mm, and 120 and 240mm can be installed on the top; the part Back of the case supports 120mm and 140mm water cooling radiators.Please pay attention to the size when setting up.The CPU heat dissipation height limit is 170mm, enough space for installation.
↑Two sets of DC cooling fans are pre-installed on the front panel
↑A set of original 140mm DC fans are pre-installed on the back of the case
↑Original SilverStone reverse blade DC fan pre-installed on the front door panel
↑Chassis side panel with 3 sets of native 2.5″ SSD mounting positions.
↑3.5″ solid-state drive mounting bracket made of plastic under the fuselage
↑Native 2.5″ SSD installation slot supports 3 sets expansion
↑3 sets of bottom-mounted 3.5″ HDD removable expansion racks (shared with 2.5″ SSD)
The main space in the bottom compartment of the KL07E is a 3.5″ hard disk rack and a place for power supply. The hard disk rack is a 3-layer removable bracket that can be removed manually. The fixed bracket is not removable.You can tilt your head when you see the non-removable fixing bracket.Considering the selection of power supply specifications, SilverStone KL07E has a depth limit of 190mm for the installation of the power supply, leaving plenty of space for passage cables. An ATX sized power supply can also be easily inserted into the computer.
↑The hard drive layered bracket is removable and the right side of the bottom compartment is where the power supply is placed.
For the PCIe part, the length of the expansion card is limited to 388mm long and 172mm wide. This case does not need to fit into the body space and castrate its own hardware configuration. Gamers who like long graphics cards are also supported. Plan the installation locations of each hardware before installation. It can also speed up assembly.
↑PCIe Slot 7 slots and 4 screws to fix the PCIe baffle, the PCIe slot is removable and reusable
The front panel I/O interface provides basic USB 3.0 x2, Type-C x1, and audio jacks, making for a complete and usable front setup.
↑Front I/O interface pin
↑Switch and indicator pins
↑I/O interface includes USB 3.0 x2, USB Type-C x1, audio source and microphone input
Since the front panel has been pre-installed with two sets of original 140mm fans, this time the CPU cooling part is equipped with a top-mounted integrated 240mm water cooler, which is also equipped with vents at Strip shape on the top cover of the fuselage for air inlet and outlet. Gamers may note that the three sets of pre-installed fans on the KL07E, front 2 and rear 1, are all DC 3-pin and are not pre-connected in series. Gamers who are concerned about internal cabling may consider purchasing additional cables or hubs for cable storage. to reduce players’ anxiety about messy internal wiring.
The back line of the rear panel is very clean and concise, so that musicians do not feel helpless when routing cables. There are also multiple sockets inside the KL07B chassis for flexible exit of the rear panel cables.
↑List of installed back lines
↑Check startup and operation
test platform:
Processor: Intel Core i7-12700k
Motherboard: ASRock PG LIGHTNING WIFI
Graphics Card: NVIDIA RTX 4060 Ti
Memory: CORSAIR VENGEANCE RGB DDR5-6400 16G*2
Operating System: Windows 11 23H2
Radiator: 240mm AIO
Power supply: seasonal FOCUS GX850
↑Cooling performance of i7-12700k CPU
↑Cooling performance of the RTX 4060 Ti
<結論>
SilverStone has long been dedicated to reducing noise in PC equipment. This time it launches this silent ATX tower case. In terms of appearance, the overall appearance is sober and calm, but there are still some details that enhance the structure of the machine, such as the stripes on the front panel and top cover, the air outlet design. The official focus is on the somatosensory noise reduction part. Although the pre-installed fans all have 3-pin DC connectors, gamers who like PWM control of the fans may frown slightly. However, the 140mm fans originally shipped by SilverStone are a small blessing for Hakka people like me. When it is actually turned on and running, especially through the AIDA CPU and FPU double baking test, it can be said that the actual measurement is that there is no wind noise, at most only slight wind noise can be heard. It is in fact silent and the ears are free.
SilverStone KL07E has such a casing design. Personally I think it is suitable for use in quiet places such as offices, studios or public institutions. Whether it is placed on the desk or under the desk, there will be no problems with jams. The current retail price of this silent case is $3,290, which is provided as a reference for build gamers who focus on silent needs.
Extended video playback:
2024-01-08 12:30:29
#Specially #selected #soundabsorbing #material #reduces #noise #Unboxing #SilverStone #Tower #ATX #Silent #Case #KL07E #XFastest